67 K-19 pulley

[Dale S.]

Just happened to look at the bolts holding my pulley and spacer to the pump. One of the 4 bolts was out about 4 or 5 threads (1/4 inch). The other 3 were loose. I know these were tight a year ago. It might have been driven 100 miles. Anyone know the torque value on these? I am going to use blue locktite this time. Any better ideas? I dont want to lose the original bolts. Dale

[Joe L.]

Re: 67 K-19 pulley

Just happened to look at the bolts holding my pulley and spacer to the pump. One of the 4 bolts was out about 4 or 5 threads (1/4 inch). The other 3 were loose. I know these were tight a year ago. It might have been driven 100 miles. Anyone know the torque value on these? I am going to use blue locktite this time. Any better ideas? I dont want to lose the original bolts. Dale

Dale-----


Torque on these bolts is 15-24 lb/ft. DEFINITELY use the blue Locktite on these.

[Dale S.]

Re: 67 K-19 pulley

Thank you Joe, I bought some blue this AM. Mine was dried out. I wiill locktite and torque. Thanksw again Dale