69 Fan Shroud Extention- Finish - Mounting? - NCRS Discussion Boards

69 Fan Shroud Extention- Finish - Mounting?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jamie F.
    Expired
    • May 20, 2008
    • 337

    69 Fan Shroud Extention- Finish - Mounting?

    My car was missing the fan shroud extention. I ordered one from Paragon. I was expecting the piece to be similar to the original shroud material and color. The piece I received was gloss black, and a hard thick material. Not at all like the thin, grayish, plastic shroud.
    Is this what original shroud extention looked like? Does anyone have a picture of their OE extention?
    Also the mounting. My orginal shroud has the round press in nuts with three prongs still in it. I assume 3 screws come through the extention and screw into these as the AIM shows. Paragon sent me 2 J-nuts and 2 bolts which is not what my shroud has.
    Any clarification would be greatly appreciated.
    Thanks!
  • Jack H.
    Extremely Frequent Poster
    • April 1, 1990
    • 9906

    #2
    Re: 69 Fan Shroud Extention- Finish - Mounting?

    In an ideal world the lower extension's material would match that of the upper shourd AND it would fit and align so you could use the captive inserts in the upper shroud to attach it. BUT, that's not been my experience...

    The reproduction extensions I've seen WERE different in color/composition and I had to mill material to achieve a fit...

    Comment

    • Dale S.
      Expired
      • November 12, 2007
      • 1224

      #3
      Re: 69 Fan Shroud Extention- Finish - Mounting?

      Me also Jack, on a 1967 SB C-60. Filing the tabs as they are two big for the slots etc. Does anyone make a QUALITY product? Dale

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"