It Ain't Purdy.................

[Joe C.]

................but it has the desired effect.

[Steven S.]

Re: It Ain't Purdy.................

If the desired effect is confusion than mission accomplished. No but seriously all I see is red X's in a box.

[Terry M.]

Re: It Ain't Purdy.................

Me too, and they AIN'T purdy wither

[Joe C.]

OK, This Should Help

Captain's log,
Star date 3476.9:

[Stewart A.]

Re: It Ain't Purdy.................

Am I missing something !! I can't see the attachment ? Stewy

[Gerard F.]

Re: It Ain't Purdy.................

Joe,

Your pictures don't show, or they must be X-rated

[Dick W.]

Re: It Ain't Purdy.................

XXXXXXXXXX

[Joe C.]

Re: It Ain't Purdy.................

Sorry all!
Take another looky look.

[Joe L.]

Re: It Ain't Purdy.................

................but it has the desired effect.

Joe----

What type of adhesive did you use? The plastic used in these later rotors is VERY difficult to bond.

[Joe C.]

Re: It Ain't Purdy.................

Joe,

I used a soldering iron to melt and move the plastic. I then repositioned the electrode and piled on the molten plastic with the soldering iron.

[Stewart A.]

Re: It Ain't Purdy.................

Nice bit of handy work. The scary thing about it it probably works Stewy

[Karl L.]

Re: It Ain't Purdy.................

[quote=Joe Ciaravino (32899);447591]................but it has the desired effect.

What am I missing here?
Apparently I never saw the first thread.
Is what you have done suppose to fine tune the way your motor operates? What little I can read of the notes also mentions reworking the fuel pump. Was this done for racing? Please clue me in.

Karl.

[Paul J.]

Re: It Ain't Purdy.................

[quote=Joe Ciaravino (32899);447591]................but it has the desired effect.

So Joe, it looks like Bubba's been working on your car. Did he just sneak in during the night and do that, or are you Dr. Jekyll?

[Gerard F.]

Re: It Ain't Purdy.................

Joe,

I used a soldering iron to melt and move the plastic. I then repositioned the electrode and piled on the molten plastic with the soldering iron.

Joe,

It looks like you have been eating too much Linguini and Clams, but without the clams.

[Joe C.]

Re: It Ain't Purdy.................

Joe,

It looks like you have been eating too much Linguini and Clams, but without the clams.

Aha!
So, DoKtor F, according to your post
It was 23:18 PDT when you finally retired from your la-BOR-a-tory.
Is it ALIVE yet?
It's alive, alive, aliiiiiiiiivvvvee. Aaaaaaahhh ha,ha,ha, ha.