C1 (1960) Window regulator parts

[Donald H.]

Does anyone know where to get parts for restoration of my 1960 window regulators? I know I can get the large Regulator Gear from a number of places. But I am looking for the parts that do the cranking. Not sure what this unit is called, but it is the part that the window handle fits on. It is the part circled in read in the attached picture.

I have looked extensively on-line at all the normal suspect corvette parts suppliers with no luck. Thanks.

Thanks,

Don Harris

[Terry D.]

Re: C1 (1960) Window regulator parts

Donald
Other than swap meets or E-Bay I know of no where to get that part, wish I did, as I could use one myself. Hopefully some one will jump in with a solution
Terry

[Donald L.]

Re: C1 (1960) Window regulator parts

Most restoration shops that have the parts will not sell the parts but will restore the regulator as it is more profitable. I believe Paragon is one such shop.

[Jerry C.]

Re: C1 (1960) Window regulator parts

Try Paul Mazut at 413 243 3439.

[Richard M.]

Re: C1 (1960) Window regulator parts

Paul is excellent! He repaired 2 C1 windshield posts for me a few weeks ago. Turnaround just a few days. Highly recommended.
Rich

[Richard T.]

Re: C1 (1960) Window regulator parts

If your looking for the splined shaft that the crank handle fits on I don't think anyone sells that part. The splined tip is the same as other 40s, 50s, and 60s GM cars. I repaired a stripped spline on my 59 years ago by cutting the tip off of the bad shaft and welding on a good used tip that I got from a bone yard. If you can find a donor it can be fixed. Rich

[Steven B.]

Re: C1 (1960) Window regulator parts

Try Grossmueller's.