Just a little fun! Will this Engine fit?

[Ray G.]

Hello;

Very amazing.

Six cylinder? Wonder how the fourteen cylinder looks.

Ray

[Tom L.]

Re: Just a little fun! Will this Engine fit?

I've seen this before, check out the link below. lots more info about it and this was the most amazing part: 108,920 @102 RPM! But...It probably won't fit.

http://people.bath.ac.uk/ccsshb/12cyl/

[Clem Z.]

Re: Just a little fun! Will this Engine fit?

i would like to see the machinery used to machine those parts especially the crankshaft

[John H.]

Re: Just a little fun! Will this Engine fit?

http://people.bath.ac.uk/ccsshb/12cyl/

Jeez, kinda makes this quad-turbo 12,000-hp V-20 diesel look puny (but the V-20 has lots of chrome valve covers) .

[Stewart A.]

Re: Just a little fun! Will this Engine fit?

How's the guys putting the crank bearings in. That's what I call grouse !!! Stewy

[Bill I.]

Re: Just a little fun! Will this Engine fit?

Several years ago, I had a visit to the engine room of the Carnival Celebration with the Chief Engineer. There were 2, 7 cyl Diesel engines. The head bolts were 2" bolts. Used 17 gals per minute. The drive shafts going to the Generators were 24" in diameter. They were fairly quite while running, turned around 400 RPM. Bill.