67 Hardtop Headliner - NCRS Discussion Boards

67 Hardtop Headliner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gene M.
    Extremely Frequent Poster
    • April 1, 1985
    • 4232

    67 Hardtop Headliner

    Which manufacturers make a correct vinyl hard top headliner with recesses for 67 hardtop?

    Knoch, Corvette America, or who ever which is most correct from your personal experience?
  • Gerard F.
    Extremely Frequent Poster
    • June 30, 2004
    • 3803

    #2
    Re: 67 Hardtop Headliner

    Originally posted by Gene Manno (8571)
    Which manufacturers make a correct vinyl hard top headliner with recesses for 67 hardtop?

    Knoch, Corvette America, or who ever which is most correct from your personal experience?
    Gene,

    I'm also interested in your question. Got my original on my 67 hardtop, took it off cause it sagged, vinyl painted it, glued it back on, it still sags.
    Just lost all the structure and backing out of it.

    Also looking for a repro which looks original and doesn't sag.

    Former Brooklyn-Queens kid,
    Jerry Fuccillo
    1967 327/300 Convertible since 1968

    Comment

    • Timothy B.
      Extremely Frequent Poster
      • April 30, 1983
      • 5177

      #3
      Re: 67 Hardtop Headliner

      I will third that question, same thing with my 67 headliner..

      Comment

      • Ara G.
        Extremely Frequent Poster
        • January 31, 2008
        • 1108

        #4
        Re: 67 Hardtop Headliner

        Hey Guys, when I had my Lynndale car I restored the Hardtop myself, including the weatherstripping and all hardware. It wasn't that hard to do, just time consuming. The headliner I got was from Al Knoch. It came damaged from shipping and they sent me another one. It too was damaged from shipping and they sent me a third. This was not Al's fault, but the boxes they came in were not filled with packing material so the damage was inevitable.
        As far as the fit and looks, it was nice. It had a tight backing that made it a little tough to get installed at the corners, but boy it fit well. It also looked good. I haven't seen ones from the other suppliers so I couldn't compare it to them, but I was happy with how it fit and looked. I kept the original one too. Absolutely NO sag or wrinkles. The color (teal) was right on too. Hope this helps you guys out. Regards and Happy Holidays. ARA. If you guys need NOS hard top Latches I got a couple of sets too... One more thing, when I went to polish the rear window, the 2 step plastic cleaner and polish worked extremely well. I got out almost every single scuff and scratch out of the original rear window. Good luck. ARA

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"