yoke snap rings - NCRS Discussion Boards

yoke snap rings

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael W.
    Expired
    • April 1, 1997
    • 4290

    #16
    Re: yoke snap rings

    Just to put your mind at ease, the only time there is load against the snap rings is when the wheels are off the ground. There is no load on them during driving- of any type.

    Comment

    • Michael H.
      Expired
      • January 29, 2008
      • 7477

      #17
      Re: yoke snap rings

      Originally posted by Dick Whittington (8804)
      My post was bass ackwards. The rounded edge goes against the pin, the sharp edge goes away from it. The thrust of the pin will cause the sharp edge to bite into the piston.

      The load on the stub would be when it pulls out. The rounded edge would go against toward the yoke, the sharp edge toward the differential.
      Dick's got it right. (if there actually is such a thing a correct way for this particular application) I've seen these rings installed either way.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"