Midyear chassis bolts - NCRS Discussion Boards

Midyear chassis bolts

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeremy H.
    Expired
    • January 1, 1999
    • 260

    Midyear chassis bolts

    I think I have this correct. In the attatched picture I have three nuts that are used to hold the upper a-arms on. They would be the bolts that you would loosen to apply the front end alignment shims. From what I understand, from left to right, first is for a 63 & 64 and should be black oxide with a lock washer, second is for a 65 & 66 and should be silver cad with a lock washer and the third is for a 67 only and is silver cad with no lock washer. Can anyone confirm that I am correct. Long Island shows the 66 and 67 to be the same, I think that is wrong.
    Thanksss
    Jeremy Hedge
    #31711
    Attached Files
  • Gary B.
    Extremely Frequent Poster
    • February 1, 1997
    • 6979

    #2
    Midyear chassis bolts

    Jeremy,

    What are the thicknesses of the left and middle nuts? I'll check the originals on my July build date '66 when I get home tonight.

    Gary

    Comment

    • Gary B.
      Extremely Frequent Poster
      • February 1, 1997
      • 6979

      #3
      Midyear chassis bolts

      Jeremy,

      The original ones on my July build date '66 are 7/16" tall, with a lock washer. They are too rusty to know what the original finish was.

      Gary

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"