finish for nuts on steering gear box to frame bolts - NCRS Discussion Boards

finish for nuts on steering gear box to frame bolts

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Steve L.
    Very Frequent User
    • June 30, 2001
    • 763
    #1

    finish for nuts on steering gear box to frame bolts

    This is for a 73. I suspect it is zinc for the nuts and lockwasher. The bolts are black phosphate.

    I just wanted to check.
    Steve L
    73 coupe since new
    Capital Corvette Club
    Ottawa, Canada
    Tags: None
      • Top
    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193
      #2
      Re: finish for nuts on steering gear box to frame bolts

      Originally posted by Steve Lischynsky (36372)
      This is for a 73. I suspect it is zinc for the nuts and lockwasher. The bolts are black phosphate.

      I just wanted to check.
      Steve-----


      Both the GM #103026 nut and GM #103320 split lockwasher had a PLAIN finish, meaning they were natural, un-plated steel.
      In Appreciation of John Hinckley
        • Top

        Comment

        • Steve L.
          Very Frequent User
          • June 30, 2001
          • 763
          #3
          Re: finish for nuts on steering gear box to frame bolts

          Thanks again Joe
          Steve L
          73 coupe since new
          Capital Corvette Club
          Ottawa, Canada
            • Top

            Comment

            • Bob I.
              Very Frequent User
              • November 9, 2006
              • 265
              #4
              Re: finish for nuts on steering gear box to frame bolts

              GM# 103026 nut, is their anything special, or just a typical 3/8-24 nut. I purchased a reproduction set, that had nuts that were double the width of a typical nut.

              Bob
                • Top

                Comment

                • Joe L.
                  Beyond Control Poster
                  • February 1, 1988
                  • 43193
                  #5
                  Re: finish for nuts on steering gear box to frame bolts

                  Originally posted by Bob Imhoff (46494)
                  GM# 103026 nut, is their anything special, or just a typical 3/8-24 nut. I purchased a reproduction set, that had nuts that were double the width of a typical nut.

                  Bob
                  Bob------


                  GM says the 103026 nut was 21/64" thick.
                  In Appreciation of John Hinckley
                    • Top

                    Comment

                    • Steve L.
                      Very Frequent User
                      • June 30, 2001
                      • 763
                      #6
                      Re: finish for nuts on steering gear box to frame bolts

                      I'll verify the 21/64" tonight since I have the originals that I just cleaned.
                      Steve L
                      73 coupe since new
                      Capital Corvette Club
                      Ottawa, Canada
                        • Top

                        Comment

                        • Steve L.
                          Very Frequent User
                          • June 30, 2001
                          • 763
                          #7
                          Re: finish for nuts on steering gear box to frame bolts

                          I measure 0.330 which is the 21/64
                          Steve L
                          73 coupe since new
                          Capital Corvette Club
                          Ottawa, Canada
                            • Top

                            Comment

                            Previous template Next
                            Working...

                            Debug Information

                            Searching...Please wait.
                            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                            Please push the back button and reload the previous window.'
                            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                            Please push the back button and reload the previous window.'
                            An internal error has occurred and the module cannot be displayed.
                            There are no results that meet this criteria.
                            Search Result for "|||"