C3 Bumper Washer Size - NCRS Discussion Boards

C3 Bumper Washer Size

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sheldon S.
    Very Frequent User
    • March 1, 1999
    • 474

    C3 Bumper Washer Size

    I am working on my 71 reattaching the bumpers, the flat washers that go under most of the attaching bolts is part number 9419276 and bolt number 9419075, 9419077. I have what I eleive to be an original washer and when I measure the outside diameter it is about 7/8 inch, the thickness appears to be about 1/16. It seems like a pretty light washer for some of the locations but it is the main washer listed. Is this the correct dimensions of the washer?
    Thanks
    Sheldon
  • Alan S.
    Extremely Frequent Poster
    • July 31, 1989
    • 3415

    #2
    Re: C3 Bumper Washer Size

    Hi Sheldon,
    I looked at my notes about the bumper fasteners from my 71.
    I show the same size washers as you list. I even made mention on some of the notes that the washers were quite thin and the torque on the bolt had deformed the washer into a slight cup shape by being pulled down into the hole in the bracket. This note is for the fasteners for the bracket for the front bumper guards to the cross-member.
    Regards,
    Alan
    Attached Files
    71 Coupe, 350/270, 4 speed
    Mason Dixon Chapter
    Chapter Top Flight October 2011

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"