Correct clutch fan for '62 - NCRS Discussion Boards

Correct clutch fan for '62

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David H.
    Expired
    • November 11, 2009
    • 777

    Correct clutch fan for '62

    Can anyone tell me if this clutch fan that was on my brother's car is correct for the 340hp engine?

    And,

    if it is, how should it be painted on the front of the clutch?

    thanks
    Attached Files
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: Correct clutch fan for '62

    can you post a photo of a close-up of the shaft?mike

    Comment

    • Grant W.
      Very Frequent User
      • December 1, 1987
      • 407

      #3
      Re: Correct clutch fan for '62

      Originally posted by David Hurd (51036)
      Can anyone tell me if this clutch fan that was on my brother's car is correct for the 340hp engine?

      And,

      if it is, how should it be painted on the front of the clutch?

      thanks

      Looks right for your 62. The early ones had a little nib off to the right of the Spring.
      No black paint on the fan clutch at all. Also on the front of the fan clutch on the 12, 3, 6, and 9 oclock position you see the flat spot with a hole in it. That is a correct corvette item.

      Hope this helps.
      Grant

      Comment

      • David H.
        Expired
        • November 11, 2009
        • 777

        #4
        Re: Correct clutch fan for '62

        Thank you Grant, I thought it was correct. I will remove the black paint.

        Mike, I have attached another picture of the shaft. Is this what you wanted to see?
        Attached Files

        Comment

        • Mike M.
          NCRS Past President
          • May 31, 1974
          • 8365

          #5
          Re: Correct clutch fan for '62

          Originally posted by David Hurd (51036)
          Thank you Grant, I thought it was correct. I will remove the black paint.

          Mike, I have attached another picture of the shaft. Is this what you wanted to see?
          that's a 62 shaft and the rest of the pics support that the fan clutch is appropriate for a 62 vette.mike

          Comment

          • Rick C.
            Very Frequent User
            • March 1, 1986
            • 183

            #6
            Re: Correct clutch fan for '62

            Mike,
            What is it about the shaft that makes it a '62?
            Rick

            Comment

            • Mike M.
              NCRS Past President
              • May 31, 1974
              • 8365

              #7
              Re: Correct clutch fan for '62

              Originally posted by Rick Casper (9781)
              Mike,
              What is it about the shaft that makes it a '62?
              Rick
              the fact that the outside diameter is uniform(no step in it) excludes it as a service replacement. the service replacements are much more common on the c-2 judging fields. mike

              Comment

              • David H.
                Expired
                • November 11, 2009
                • 777

                #8
                Re: Correct clutch fan for '62

                Thanks for your help on this one everyone!

                Comment

                • Robert B.
                  Frequent User
                  • December 1, 1999
                  • 56

                  #9
                  Re: Correct clutch fan for '62

                  Dave,

                  Here are links to a couple of pictures of the clutch fan for my '60 270 horse that I got back from Fred Oliva today. Glad to see you are progressing!



                  1960 Corvette Fan Clutch Restored by Fred Oliva

                  Comment

                  • David H.
                    Expired
                    • November 11, 2009
                    • 777

                    #10
                    Re: Correct clutch fan for '62

                    Thanks Bob, the pictures will help me.

                    Two steps forward......One step back......Two steps forward......One step back!

                    But forward progress indeed.

                    Comment

                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"