1967 Dill valve stem caps - NCRS Discussion Boards

1967 Dill valve stem caps

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dale S.
    Expired
    • November 12, 2007
    • 1224

    1967 Dill valve stem caps

    I am trying to figure out what Dill valve stem cap is the original on my 67. I keep the pressure monitors on my tires and threw all my valve stem caps in a plastic bag marked originals. I have Dill at the top, 627 at the bottom, looking at the top of the cap. At the 3 o'clock position between Dill and 627, I have very, very small letters and numbers, one has I J, one 70, one 30 or 38, one 3F or 3P, one N 2, one I R or I 2, three with 50 or 56. I also have 3 with no small letter or numbers. what is correct and what are the rest? Thank you Dale
  • Dale S.
    Expired
    • November 12, 2007
    • 1224

    #2
    Re: 1967 Dill valve stem caps

    I guess no one else knows either. Thank you Dale

    Comment

    • Alan D.
      Extremely Frequent Poster
      • January 1, 2005
      • 2027

      #3
      Re: 1967 Dill valve stem caps

      Dale, know that has been discussed before just can not find for you.
      As I recall the font size on the DILL will be somewhat smaller for a C2. The 627 is typical and the small stuff @ 3 appears on only some caps.
      (I have 8 caps - only 2 have the stuff @ 3)

      Comment

      • Don H.
        Moderator
        • June 16, 2009
        • 2236

        #4
        Re: 1967 Dill valve stem caps

        just yesterday this threading was running

        https://www.forums.ncrs.org/showthre...84542&uid=4284

        Comment

        • Dale S.
          Expired
          • November 12, 2007
          • 1224

          #5
          Re: 1967 Dill valve stem caps

          I was interested in the small muliple letters or digits at the 3 o'clock position. Thank you Alan. I will look to see if I have any different sized 627's

          Comment

          • Alan D.
            Extremely Frequent Poster
            • January 1, 2005
            • 2027

            #6
            Re: 1967 Dill valve stem caps

            Also take a look at these; They are fairly short but lots of good info.

            63 Reproduction tires.
            Tom Hendricks (23758)

            tires/rims/hubcaps,etc
            Noel Kendall (42755)

            Length Matters: '65-66 Valve Stems
            Wayne Midkiff (3437)

            Comment

            • Jack H.
              Extremely Frequent Poster
              • April 1, 1990
              • 9906

              #7
              Re: 1967 Dill valve stem caps

              Could be that ALL of the variations are 'correct'... The ancillary emboss marks are thought to be mold/source identifiers and we know we don't know their exact 'translation'. I wouldn't lose sleep of which of the caps to use...

              Comment

              • Wayne M.
                Expired
                • March 1, 1980
                • 6414

                #8
                Re: 1967 Dill valve stem caps

                Originally posted by Dale Schafer (48165)
                .... I have very, very small letters and numbers, one has I J, one 70, one 30 or 38, one 3F or 3P, one N 2, one I R or I 2, three with 50 or 56. I also have 3 with no small letter or numbers. what is correct and what are the rest? ....
                Dale -- here's a pic showing with and without the three o'clock characters.

                Jack H. gives good opinion on the meaning of these codes. However, that doesn't stop some enterprising eBay seller with what must be a huge stash from offering sets of 5 with matching codes, digit being the year and letter = the month (in his opinion).
                Attached Files

                Comment

                • Dale S.
                  Expired
                  • November 12, 2007
                  • 1224

                  #9
                  Re: 1967 Dill valve stem caps

                  Thank you to all who responded. All of my caps have the same sized Dill and 627, I guess I will use the best 5. Dale

                  Comment

                  • Pat F.
                    Very Frequent User
                    • April 1, 1981
                    • 852

                    #10
                    Re: 1967 Dill valve stem caps

                    Guys, I resonded to another thread with some photos of the valve stem caps on my 1995 LT1. They all have DILL and 627 on them. The third characters are all different.

                    RF--5F
                    LF--8(?)
                    LR--7(A-?)
                    RR-8P
                    Attached Files
                    PAT, Central New Jersey and Florida Chapters

                    Comment

                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"