63 Front Stabilizer bracket bolts help

[Edward J.]

I am in the process of re-assy. of my chassis and need some help on the bolt type, AIM shows part no. 3817575
5/16 recessed head with washer? maybe 3/8 . Thanks Ed

[Rich P.]

Re: 63 Front Stabilizer bracket bolts help

I am in the process of re-assy. of my chassis and need some help on the bolt type, AIM shows part no. 3817575
5/16 recessed head with washer? maybe 3/8 . Thanks Ed

Ed,

5/16-18 recessed hex head with a captured split ring lock washer. 7/8" long measured from under the washer. These have a flat tip. Known original headmarkings include but is not limited to....
Anchor
RBW
GL
Flying F
B
B&H
E

I have pictures on my in house computer I can post later tonight if need be.

Rich

[Alan D.]

Re: 63 Front Stabilizer bracket bolts help

Ed, I have the 5/16-18 recessed head with lw and anchor mark however that's for a 3784303 assembly used on a Mar64 car. I do not have any info
on the 3817575, but would guess its the same 5/16. And since its for a 63 car remember it could have changed a few times just to make life difficult.

Another minor point is going to be the retainer, 5544049, and nut, 3654642. Think you will find the retainer has a light gold look to it.