63 Oil Canister Bolt Head Mark - NCRS Discussion Boards

63 Oil Canister Bolt Head Mark

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Alexander M.
    Expired
    • January 1, 2006
    • 48

    63 Oil Canister Bolt Head Mark

    Does anyone know if there is a correct head mark for the bolt that holds the Oil Filter Canister on? The JG does not mention one. I have one marked "AP" and another one that is blank.
    Thanks
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: 63 Oil Canister Bolt Head Mark

    Originally posted by Alexander Michelini (45077)
    Does anyone know if there is a correct head mark for the bolt that holds the Oil Filter Canister on? The JG does not mention one. I have one marked "AP" and another one that is blank.
    Thanks
    Alexander-----


    "AP" is one of the ones I recall. There may very well have been others, but you have an "AP" so why look for any others?
    In Appreciation of John Hinckley

    Comment

    • Wayne M.
      Expired
      • March 1, 1980
      • 6414

      #3
      Re: 63 Oil Canister Bolt Head Mark

      I have one with a "M" (fat and flat font). Can take a pic if would help. Believe it is original can off a June '65 assembled BB.

      Comment

      • Peter L.
        Extremely Frequent Poster
        • May 31, 1983
        • 1930

        #4
        Re: 63 Oil Canister Bolt Head Mark

        Al - I find that the "M" is more commonly found on the earlier canisters while the "AP" is more commonly found on 66 & 67 canisters. Pete

        Comment

        • Wayne M.
          Expired
          • March 1, 1980
          • 6414

          #5
          Re: 63 Oil Canister Bolt Head Mark

          Originally posted by Peter Lindahl (6598)
          Al - I find that the "M" is more commonly found on the earlier canisters while the "AP" is more commonly found on 66 & 67 canisters. Pete

          Here's the one I mentioned above, found on my May '65 396. It's a little rough . The center is raised, not sunk.
          Attached Files

          Comment

          • Peter L.
            Extremely Frequent Poster
            • May 31, 1983
            • 1930

            #6
            Re: 63 Oil Canister Bolt Head Mark

            Wayne - Nice photo. I should have know that the canister bolt head mark on your cars would be a "M." Pete

            Comment

            • Larry M.
              Extremely Frequent Poster
              • January 1, 1992
              • 2688

              #7
              Re: 63 Oil Canister Bolt Head Mark

              Originally posted by Wayne Midkiff (3437)
              Here's the one I mentioned above, found on my May '65 396. It's a little rough . The center is raised, not sunk.
              Looks like that '65 had frequent oil and filter changes.

              Larry

              Comment

              • Alan D.
                Extremely Frequent Poster
                • January 1, 2005
                • 2027

                #8
                Re: 63 Oil Canister Bolt Head Mark

                Another style, mid 64 car
                Attached Files

                Comment

                • Alexander M.
                  Expired
                  • January 1, 2006
                  • 48

                  #9
                  Re: 63 Oil Canister Bolt Head Mark

                  Hi Guys,
                  Thanks for the pics and info. Very helpful.

                  Comment

                  • Joe L.
                    Beyond Control Poster
                    • February 1, 1988
                    • 43193

                    #10
                    Re: 63 Oil Canister Bolt Head Mark

                    One thing to keep in mind here: during the pre-1968 period, GM was using these oil filter canisters (and bolts) by the MILLIONS every year. Thus, there were likely multiple sources for these bolts in any given year.
                    In Appreciation of John Hinckley

                    Comment

                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"