If this is your first visit, be sure to check out the FAQ You must be an NCRS member before you can post: click the Join NCRS link above to join. To start viewing messages,
select the forum that you want to visit from the selection below. If you have trouble logging in you can clear your cookies here!
I believe that you have to insert your key. Turn to Accessory. Then insert the straightened paperclip into the hole in the face of the switch. Then the lock cylinder will come out of the housing in the dash.
I believe that you have to insert your key. Turn to Accessory. Then insert the straightened paperclip into the hole in the face of the switch. Then the lock cylinder will come out of the housing in the dash.
Jim
Put the paper clip in the upper hole--turn counterclockwise as you push the paper clip in. You will feel the paper clip push against spring pressure--that's the time to turn counterclockwise.
Put the paper clip in the upper hole--turn counterclockwise as you push the paper clip in. You will feel the paper clip push against spring pressure--that's the time to turn counterclockwise.
ignition swith removal
Comment