'63 Install Washer on wiper motor - NCRS Discussion Boards

'63 Install Washer on wiper motor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jack Y.
    Frequent User
    • June 30, 2005
    • 76

    '63 Install Washer on wiper motor

    I have checked the archives but still having an issue with mounting the washer unit on the wiper motor which is still installed. I can't seem to be sure the metal drive pawl on the wiper is engaged with the plastic star wheel on the washer unit. I even filled the plastic cavity with grease, installed the washer and removed it to see if it had displaced the grease. It did not but the unit fit flush for attachment. There are only 4 positions on the star wheel and I tried all four. Do I need to run the wiper motor to change the position of the metal pawl? I hesitate to attach it and run the wipe as I am afraid if it is not aligned it may destroy the plastic star wheel. I have no idea if the washer was in the correct position when I removed the washer and I did not run the wipers before or after I removed the washer.

    Thanks in advance!
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"