66 emblem placement - NCRS Discussion Boards

66 emblem placement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bob C.
    Infrequent User
    • April 30, 1999
    • 13

    66 emblem placement

    I am working on a 66 project with no holes for the emblems, after seaching the forum and checking another 66 it seems there are two groups of measurments about 1/4" to 1/2" different. Is this a normal variance or would St. Louis and AOL have done it differently?
  • John H.
    Beyond Control Poster
    • December 1, 1997
    • 16513

    #2
    Re: 66 emblem placement

    Originally posted by Bob Coltman (32221)
    I am working on a 66 project with no holes for the emblems, after seaching the forum and checking another 66 it seems there are two groups of measurments about 1/4" to 1/2" different. Is this a normal variance or would St. Louis and AOL have done it differently?
    Bob -

    Neither A.O. Smith nor St. Louis did anything to the hood - the outer panel holes for the emblem pins were pre-drilled from the molder.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"