Need Part Look Up

[Joe M.]

I would appreciate it if someone could look up part number 100149? I would like to know the dimensions.

This is the bolt that holds the rear of the PG tranny to the bracket. I found it in Noland Adams book in the 1956-1957 section. The bolt was shown to insert from the bottom up just as I found the bolt on my 1960 PG.

[Gary C.]

Re: Need Part Look Up

Joe, sorry that bolt's not on my bolt chart. Check the Paragon catalog. Gary....

[Joe L.]

Re: Need Part Look Up

I would appreciate it if someone could look up part number 100149? I would like to know the dimensions.

This is the bolt that holds the rear of the PG tranny to the bracket. I found it in Noland Adams book in the 1956-1957 section. The bolt was shown to insert from the bottom up just as I found the bolt on my 1960 PG.

Joe------


It was never a SERVICE-available bolt, so I have no information on it.

[Donald H.]

Re: Need Part Look Up

Joe,

If you are talking about the bolts that hold the trans mounting bracket to the transmission the AIM Section 6 sheet 6.00, or the Section 313 Automatic Transmission doesn't show any difference in mounting technique for 3-speed, 4-speed or powerglide. The bolt listed there is GM # 179837. The Paragon bolt (which I bought to mount my 4-speed) is their part # 611K and it is a 3/8-16x1" bolt.

Again, that is the one that screws into the transmission from the bottom.

Don