61 Harness Clamp - NCRS Discussion Boards

61 Harness Clamp

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dennis C.
    Very Frequent User
    • June 30, 2002
    • 884

    61 Harness Clamp

    Hi,

    Section 12, sheet 9 of the 1961 AIM shows cable clamps on the under dash wiring that is secured to the clips that fasten to the windshield bolts. However there is no part number shown.

    Would these be the same plastic wire ties used in the front to secure the headlight and horn wiring?

    Thanks!

    Dennis
  • Pat H.
    Very Frequent User
    • December 1, 1996
    • 418

    #2
    Re: 61 Harness Clamp

    I believe these are metal clips used to secure the harness under the dash. I know many of these clips are missing when the windshield is replaced because they attach to the windshield studs and it's a pain to re-install them with everything in place.

    Comment

    • Dennis C.
      Very Frequent User
      • June 30, 2002
      • 884

      #3
      Re: 61 Harness Clamp

      Pat,

      I know about the clips that mount to the windshield bolts. The harness clamps shown in the AIM on either side of the windshield clips.

      Dennis

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"