1965 Disc Brake Rotor Shield Color - NCRS Discussion Boards

1965 Disc Brake Rotor Shield Color

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jimmy B.
    Expired
    • July 31, 1980
    • 584

    1965 Disc Brake Rotor Shield Color

    I am taking my 65 apart for restoration and am looking for guidance on what color the disc brake rotor shields (f & R) should be plated. Mine are a dull gray whitish and definetely need restoration.

    Thanks for your help.

    Jim Blakely
  • Stephen L.
    Extremely Frequent Poster
    • May 31, 1984
    • 3148

    #2
    Re: 1965 Disc Brake Rotor Shield Color

    If they have a "drip/run" look to the finish, that is original. I had mine cad plated (as in over restored) even tho they showed the original finish as shown in the attached thread.

    https://www.forums.ncrs.org/showthre...88533&uid=2708

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: 1965 Disc Brake Rotor Shield Color

      Originally posted by Jimmy Blakely (3742)
      I am taking my 65 apart for restoration and am looking for guidance on what color the disc brake rotor shields (f & R) should be plated. Mine are a dull gray whitish and definetely need restoration.

      Thanks for your help.

      Jim Blakely
      Jim------


      The front shields were zinc or cadmium plated with no chromate (i.e. "gold") overplate.

      The rears were usually stamped of pre-punch galvanized material. In other words, galvanized sheet stock was used to fabricate the shields and no subsequent plating was performed. Manufactured in this manner, the very edges of the shield are bare metal.
      In Appreciation of John Hinckley

      Comment

      • Jimmy B.
        Expired
        • July 31, 1980
        • 584

        #4
        Re: 1965 Disc Brake Rotor Shield Color

        Thanks for your speedy reply. I will give this information to my plater.

        Anyone ever use Steve Gregori who advertises in the "NCRS DRIVELINE"?

        Comment

        • Stephen L.
          Extremely Frequent Poster
          • May 31, 1984
          • 3148

          #5
          Re: 1965 Disc Brake Rotor Shield Color

          I've used Gregorie on a couple of occasions. Does good work and stands behind it.

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"