C1 Softtop Hardware - NCRS Discussion Boards

C1 Softtop Hardware

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • James R.
    Expired
    • November 18, 2008
    • 89

    C1 Softtop Hardware

    I am restoring the soft top on my 58. I have the hardware rebuild kit from CC. What is the correct finish for the top's hardware? Was it painted along with the bows and would therefore be black vs. bows painted seperately and assembled with plate finished bolts, washers, pins etc.?
    Thanks,
    Jim
  • Adam S.
    Expired
    • July 30, 2008
    • 167

    #2
    Re: C1 Softtop Hardware

    James, from all Info. I have seen & in the restorer books all the frame iron with bows were painted or dipped in black (1956 & 1957 had some of the frames painted white) paint before it was assemabled, so most hardware was not painted as top was assemabled with pre finished iron. Sure someone will add to that.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"