C2 Hardtop Moulding Removal

[Timothy B.]

I need to remove the top reveal moulding around the rear window of a C2 hardtop and don't want to chip the new paint.

Any suggestions on the best way to do this, I am thinking about removing the lower trim and trying to remove the window then the top trim but if there is a easier way I would like to know.

Thanks in advance, Tim

[Richard M.]

Re: C2 Hardtop Moulding Removal

Tim, Sounds like a dilemma but in order to remove the back glass you really need to remove all of the trim first. Maybe use some safe-release masking tape on the paint and tuck it under the trim for safety before removal.

I restored a 67 HT several months ago and removed the back glass to reseal, and it was quite difficult to get reinstalled. Took a few tries.

Rich