Frame Pull Date - NCRS Discussion Boards

Frame Pull Date

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David S.
    Very Frequent User
    • August 9, 2009
    • 595

    Frame Pull Date

    Hi All,

    I'm ready to hand write the frame pull date on the passenger side of the frame. I will write it in a white chalk pen (this is a 67). My question is, how do I calculate what the frame pull date is.

    Thanks,
    Dave
  • Craig O.
    Very Frequent User
    • July 31, 1983
    • 207

    #2
    Re: Frame Pull Date

    do a search in the Technical Discussion Archive , lots of info

    Comment

    • Gary B.
      Extremely Frequent Poster
      • February 1, 1997
      • 6979

      #3
      Re: Frame Pull Date

      Dave,

      I think you'll find that '67 frames did not have a hand-written pull date. Based on my research hand-written pull dates ended early in the '66 model year. Early in the '66 model year is when a date appeared explicitly in the frame stencil.

      Gary

      Comment

      • Gene M.
        Extremely Frequent Poster
        • April 1, 1985
        • 4232

        #4
        Re: Frame Pull Date

        I think you will find that the 67 model does not have any date in the stencil as many say. Typical original stencils do not exhibit "pull dates" in-fact most vary in the positions of line one and two. These two numbers 3900200 and 303196 (and others 3900200) appear on original cars sometimes reversed. The "GC" is sporadic in appearance. This stencil thing is being taken all too seriously.

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"