Bubba moment,"Where do these go?"

[Henry S.]

The last few weeks I have been doing some work/maintenance on the 67. One of the areas I am working on is the chassis, cleaning some of the hardware and fasteners. Since this project has been going on for a few weeks I have got everything back in it's place with the exception of the ones pictures below. For the life of me I can't remember where the *#%# they go!! I know I am going to feel like a goofball when someone posts their position. Thanks for the info. Shooter


DSCN3507.jpg

[William C.]

Re: Bubba moment,"Where do these go?"

Look like body mount shims.

[Henry S.]

Re: Bubba moment,"Where do these go?"

Look like body mount shims.

A hah....................Bill could they be the shims used at the very front of the frame the radiator support bolts into?

[William C.]

Re: Bubba moment,"Where do these go?"

Sure look like those could be...

[Michael G.]

Re: Bubba moment,"Where do these go?"

Sure look like those could be...

Many times these are welded to the frame at the radiator support.

[John H.]

Re: Bubba moment,"Where do these go?"

Henry -

That particular shim was used in three locations:

1. Radiator support to frame mount (they were usually welded in place, but not always).

2. Between the bottom of the #1 body mount bracket riveted to the dash and the top surface of the steel birdcage sill; A.I.M. UPC 1-Asm, sheets G1 & G3, item #2.

3. Between the front of the RH seat track and the floor to level the seat; A.I.M. UPC 1-Seats, sheet J5, item #13.

[Henry S.]

Re: Bubba moment,"Where do these go?"

Thanks for the responses. Since I was cleaning up the front chassis I'm sure when I head over to the shop tomorrow the shims between the radiator support and frame will be MIA.