Small Block Push Rods - NCRS Discussion Boards

Small Block Push Rods

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    Small Block Push Rods

    I would be very interested if folks could check original pushrods they might have lying around to see if the stems are hardened, or not. All you need to do is to run a file across the stem. If the file "cuts metal" the stems are not hardened. If the file glides across without cutting, the stems are hardened. Basically, there were 4 pushrods used over the 1955-82 period.

    1955-----------------------GM #3703924

    1956-61--------------------GM #3837152 (yes, this is the original part number)

    1962-63 (250/300 HP)-------GM #3817616

    1962-63 (340/360 HP)
    All 1964-82-----------------GM #3796243 (we know this one has hardened stems)

    If you have some pushrods lying around that you are reasonably sure came from one of the above, it will just take a moment for you to check. Thanks.

    Inquiring minds want to know!!!!
    In Appreciation of John Hinckley
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"