C -1 '61 with dual carbs idling issues - NCRS Discussion Boards

C -1 '61 with dual carbs idling issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike B.
    Expired
    • August 14, 2011
    • 61

    #16
    Re: C -1 '61 with dual carbs idling issues

    Thanks to all. Funny you mention the vacuum pulsation. In trying to adjust carbs with vacuum guage I cant due to rapid needle oscillation between 9 and 13 at idle which means I have other issues I am sure. Only able to adjust with the screws for the time being. About the stripped screws I was hoping that I could just tap like you suggested. Thanks.

    Comment

    • Clem Z.
      Expired
      • January 1, 2006
      • 9427

      #17
      Re: C -1 '61 with dual carbs idling issues

      Originally posted by Mike Brinson (53700)
      Thanks to all. Funny you mention the vacuum pulsation. In trying to adjust carbs with vacuum guage I cant due to rapid needle oscillation between 9 and 13 at idle which means I have other issues I am sure. Only able to adjust with the screws for the time being. About the stripped screws I was hoping that I could just tap like you suggested. Thanks.
      when using longer screws i have found i had to cut the screws to a length i could use because some of the holes bottom out

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"