67 Front license plate bracket mounting location - NCRS Discussion Boards

67 Front license plate bracket mounting location

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Neal K.
    Very Frequent User
    • October 31, 2007
    • 303

    67 Front license plate bracket mounting location

    I am trying to verify the mounting location for the front license plate bracket for a 67 with L-79 and a/c. UPC C60 Page B4 of the AIM shows it mounted on a special bracket under the drivers side bumper(on the left side). I could not find a reference on that page to either BB or SB application. But I recall reading that the standard location in the front center of the car between the bumpers is correct, and that the drivers side locatin is for BBcars with a/c
    Any help on my question is most appreciated.
    Thanks
    Neal
  • Larry M.
    Extremely Frequent Poster
    • January 1, 1992
    • 2688

    #2
    Re: 67 Front license plate bracket mounting location

    Originally posted by Neal Kalis (48092)
    I am trying to verify the mounting location for the front license plate bracket for a 67 with L-79 and a/c. UPC C60 Page B4 of the AIM shows it mounted on a special bracket under the drivers side bumper(on the left side). I could not find a reference on that page to either BB or SB application. But I recall reading that the standard location in the front center of the car between the bumpers is correct, and that the drivers side locatin is for BBcars with a/c
    Any help on my question is most appreciated.
    Thanks
    Neal
    Neal:

    For your small block car (L-79) with AC, the mounting position is front and center.

    The offset position is for big block cars with BOTH AC and auto transmission. For BB cars with AC and 4-speed, the mounting is the same as for the SB cars (front and center).

    Larry

    Comment

    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513

      #3
      Re: 67 Front license plate bracket mounting location

      [QUOTE=Neal Kalis (48092);625661 I could not find a reference on that page to either BB or SB application. But I recall reading that the standard location in the front center of the car between the bumpers is correct, and that the drivers side locatin is for BBcars with a/c
      Any help on my question is most appreciated.
      Thanks
      Neal[/QUOTE]

      Neal -

      The offset license plate bracket is covered in the '67 Judging Guide in the Exterior area, section #13, License Bracket; also shown (with photos) in Noland's book, page 408.

      Comment

      • Neal K.
        Very Frequent User
        • October 31, 2007
        • 303

        #4
        Re: 67 Front license plate bracket mounting location

        Larry & John,Thanks for your replies. I had seen the picture in Nolan Adam's book and the Judging Guide location description as well, I just couldn't reconcille that information with the AIM which doesn't indicate in UPC 60 on page B4 that the mounting location under the left bumper is limited to BB with a/c.Neal

        Comment

        • Kenneth B.
          Extremely Frequent Poster
          • August 31, 1984
          • 2084

          #5
          Re: 67 Front license plate bracket mounting location

          The idea was to get more air flow on BB/AC & auto Corvettes. I had a BB/AC auto & it had the bracket on the driver side bumper.
          65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
          What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE

          Comment

          • Neal K.
            Very Frequent User
            • October 31, 2007
            • 303

            #6
            Re: 67 Front license plate bracket mounting location

            I appreciate the input. Can I conclude then that the AIM(UPC 60 page B4) is in error by not stating that the license plate bracket mounting location under the drivers bumper is applicable to BB with a/c only?
            Neal

            Comment

            • John H.
              Beyond Control Poster
              • December 1, 1997
              • 16513

              #7
              Re: 67 Front license plate bracket mounting location

              Originally posted by Neal Kalis (48092)
              I appreciate the input. Can I conclude then that the AIM(UPC 60 page B4) is in error by not stating that the license plate bracket mounting location under the drivers bumper is applicable to BB with a/c only?
              Neal
              Neal -

              Yes, an error of omission - usually the title block identifies a unique application, but that one didn't.

              Comment

              • Neal K.
                Very Frequent User
                • October 31, 2007
                • 303

                #8
                Re: 67 Front license plate bracket mounting location

                John,
                Thanks
                Neal

                Comment

                Working...

                Debug Information

                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"