Diverter Valve assembly - NCRS Discussion Boards

Diverter Valve assembly

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Peter S.
    Very Frequent User
    • March 28, 2012
    • 327

    Diverter Valve assembly

    What is the appropriate way to attach the tee inlet to the diverter valve body? Mine has gave way.

    Diverter Valve.jpg
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: Diverter Valve assembly

    Originally posted by Peter Stout (54749)
    What is the appropriate way to attach the tee inlet to the diverter valve body? Mine has gave way.

    [ATTACH=CONFIG]43739[/ATTACH]
    Peter-----


    My recollection is that the cast valve body was peened to retain the "tee". Are there four. circular peen marks on the valve body?
    In Appreciation of John Hinckley

    Comment

    • Peter S.
      Very Frequent User
      • March 28, 2012
      • 327

      #3
      Re: Diverter Valve assembly

      Originally posted by Joe Lucia (12484)
      Peter-----


      My recollection is that the cast valve body was peened to retain the "tee". Are there four. circular peen marks on the valve body?
      Right you are Joe. Now considering that it's actually the outlet tee, was there some kind of o-ring seal? Diverter Valve-02.jpg

      Comment

      • Joe L.
        Beyond Control Poster
        • February 1, 1988
        • 43193

        #4
        Re: Diverter Valve assembly

        Originally posted by Peter Stout (54749)
        Right you are Joe. Now considering that it's actually the outlet tee, was there some kind of o-ring seal? [ATTACH=CONFIG]43746[/ATTACH]
        Peter-----


        I don't think there was any o-ring seal. However, there MAY have been a gasket at the base of the tee. I'm not sure, though.
        In Appreciation of John Hinckley

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"