C2 and C3 Brake Handle Slider - NCRS Discussion Boards

C2 and C3 Brake Handle Slider

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mark S.
    Expired
    • February 1, 2002
    • 110

    C2 and C3 Brake Handle Slider

    Correct Emergency Brake Handle slide installation, cut as shown.
    Hope this helps. air lift 001.jpgair lift 002.jpg
  • Gene M.
    Extremely Frequent Poster
    • April 1, 1985
    • 4232

    #2
    Re: C2 and C3 Brake Handle Slider

    I thought (going on memory so don't get excited) but seem to recall the slider slice is on opposite side on c2 from c3. Maybe it is a replacement part issue...........?

    Comment

    • Terry M.
      Beyond Control Poster
      • September 30, 1980
      • 15573

      #3
      Re: C2 and C3 Brake Handle Slider

      Originally posted by Mark Skroupa (37274)
      Correct Emergency Brake Handle slide installation, cut as shown.
      Hope this helps. [ATTACH=CONFIG]46591[/ATTACH][ATTACH=CONFIG]46592[/ATTACH]
      I know for certain that the direction of the cut is stated in the 1970-72 TIM&JG. I strongly suspect it is also in the 1968-69 TIM&JG, and I wouldn't be surprised that it is in the 1967 version as well as other versions.
      Terry

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"