window crank Escutcheon - NCRS Discussion Boards

window crank Escutcheon

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Doug R.
    Frequent User
    • November 2, 2009
    • 65

    window crank Escutcheon

    I'm putting new door panels on my 65 coupe. One of the escutcheons behind the window crank does not line up right. Is there any adjustment to them? I installed them on the new panels the same way, with the two closer holes at the top. One panel came out perfect, the other one is off a little. Any one have experience with the escutcheon? Thanks
  • Gene M.
    Extremely Frequent Poster
    • April 1, 1985
    • 4232

    #2
    Re: window crank Escutcheon

    Doug,
    Are you referring to reproduction panels or originals? Also if repro, were they pre assembled with trim stainless pieces? If the later is the case the escutcheons behind the window crank were not placed in proper position. Kinda too bad now as the holes are already poked thu the vinyl panels. Are they centered with the pre formed contour of the panel? If so the panel its self is off kilter.

    Original panels always fit best, anything else is just a compromise.

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"