1970 fender lip notches - NCRS Discussion Boards

1970 fender lip notches

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jim T.
    Expired
    • March 1, 1993
    • 5351

    #16
    Re: 1970 fender lip notches

    Steven a recent event, a TN state highway patrol officer stopped a vehicle on I-40 for traffic violation. Driver sped off and was pursued and caught. 457 lbs of marijuana in bales coming from Wichita Falls, TX.

    Comment

    • Kenneth H.
      Expired
      • October 27, 2008
      • 500

      #17
      Re: 1970 fender lip notches

      I'm confused. Does anyone have a picture of these notches and also of their location on the fender? I reached under both of my fenders for the first time and to my shagrin I think I may have felt some filler undreneath, but no notches. I'm not sure if I'm looking in the right spot though.

      Comment

      • Kenneth B.
        Extremely Frequent Poster
        • August 31, 1984
        • 2084

        #18
        Re: 1970 fender lip notches

        Originally posted by Kenneth Hoffman (49631)
        I'm confused. Does anyone have a picture of these notches and also of their location on the fender? I reached under both of my fenders for the first time and to my shagrin I think I may have felt some filler undreneath, but no notches. I'm not sure if I'm looking in the right spot though.
        The notches are where Reba stated. The second one toward the door is only a inch long & half the width of the lip with radiuses like the other one. Hope it helps.
        65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
        What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE

        Comment

        • Kenneth B.
          Extremely Frequent Poster
          • August 31, 1984
          • 2084

          #19
          Re: 1970 fender lip notches

          Originally posted by Terry McManmon (3966)
          Don't be shy Ken. Just reach up there and feel for them notches. You will be amazed at the results.
          Thanks for the encouragement. I did it but waited to do it in the privacy of my garage with the lights out of course.
          65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
          What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE

          Comment

          • Terry M.
            Beyond Control Poster
            • September 30, 1980
            • 15573

            #20
            Re: 1970 fender lip notches

            Originally posted by Kenneth Barry (7808)
            The notches are where Reba stated. The second one toward the door is only a inch long & half the width of the lip with radiuses like the other one. Hope it helps.
            I have it on my list for the AJS at the National, but you will have to wait until Wednesday or Thursday. If they let me near the Bowtie Judging on Tuesday, I will try, but they usually shag us lookie-lous away so they can do their job(s).
            Terry

            Comment

            • Terry M.
              Beyond Control Poster
              • September 30, 1980
              • 15573

              #21
              Re: 1970 fender lip notches

              Originally posted by Kenneth Barry (7808)
              Thanks for the encouragement. I did it but waited to do it in the privacy of my garage with the lights out of course.
              WTG Ken -- that will get you to home base every time. You should get out more -- on the Canadian Road Tour (don't ask how I got hooked up this them Canucks, eh) Scott offered us the chance to watch submarine races as the sun set over Lake Erie. You took up shelter in that arid southwest and are missing all the fun. Mike Johnson came out to play, you should too.
              Terry

              Comment

              • Patrick H.
                Beyond Control Poster
                • December 1, 1989
                • 11608

                #22
                Re: 1970 fender lip notches

                Originally posted by Kenneth Hoffman (49631)
                I'm confused. Does anyone have a picture of these notches and also of their location on the fender? I reached under both of my fenders for the first time and to my shagrin I think I may have felt some filler undreneath, but no notches. I'm not sure if I'm looking in the right spot though.
                There are photos of my car in the link in my signature. Included are photos of the notches.
                Vice-Chairman (West), Michigan Chapter NCRS
                71 "deer modified" coupe
                72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
                2008 coupe
                Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

                Comment

                • Kenneth H.
                  Expired
                  • October 27, 2008
                  • 500

                  #23
                  Re: 1970 fender lip notches

                  Patrick, thanks. Those pictures are just what I was looking for. I'll check it out tonight when I get home. Terry, if you take pictures, could you post them also?

                  Comment

                  • Terry M.
                    Beyond Control Poster
                    • September 30, 1980
                    • 15573

                    #24
                    Re: 1970 fender lip notches

                    Originally posted by Kenneth Hoffman (49631)
                    Patrick, thanks. Those pictures are just what I was looking for. I'll check it out tonight when I get home. Terry, if you take pictures, could you post them also?
                    Ken,
                    How many would you like?

                    DSCN0591.jpgDSCN0616.jpgDSCN0626.jpgDSCN0627.jpg

                    The two Warbonnet pictures are from different cars. Ken, go to your car with a light and look up under its skirt, and see what you see. You have an expedition to do.
                    Terry

                    Comment

                    • Kenneth B.
                      Extremely Frequent Poster
                      • August 31, 1984
                      • 2084

                      #25
                      Re: 1970 fender lip notches

                      Originally posted by Terry McManmon (3966)
                      Ken,
                      How many would you like?

                      [ATTACH=CONFIG]47365[/ATTACH][ATTACH=CONFIG]47367[/ATTACH][ATTACH=CONFIG]47368[/ATTACH][ATTACH=CONFIG]47369[/ATTACH]

                      The two Warbonnet pictures are from different cars. Ken, go to your car with a light and look up under its skirt, and see what you see. You have an expedition to do.
                      NO MAS I have 3 1970's now. All have/had original paint when I bought them. The lips on mine look like the maroon Corvette pict. with the F 60-15 tire or was that a pict. of a Camaro fender?
                      65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
                      What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE

                      Comment

                      • Terry M.
                        Beyond Control Poster
                        • September 30, 1980
                        • 15573

                        #26
                        Re: 1970 fender lip notches

                        Originally posted by Kenneth Barry (7808)
                        NO MAS I have 3 1970's now. All have/had original paint when I bought them. The lips on mine look like the maroon Corvette pict. with the F 60-15 tire or was that a pict. of a Camaro fender?
                        You had to pick the one I have questions about myself. That was a 1968 or 1969 all were in for Bowtie judging. I am not sure how it did -- or for that matter I am not sure how any of the others did either.
                        Terry

                        Comment

                        • Kenneth B.
                          Extremely Frequent Poster
                          • August 31, 1984
                          • 2084

                          #27
                          Re: 1970 fender lip notches

                          Originally posted by Terry McManmon (3966)
                          You had to pick the one I have questions about myself. That was a 1968 or 1969 all were in for Bowtie judging. I am not sure how it did -- or for that matter I am not sure how any of the others did either.
                          The first pict. doesn't look right to me. Too rough & jagged to be molded that way.
                          65 350 TI CONV 67 J56 435 CONV,67,390/AIR CONV,70 454/air CONV,
                          What A MAN WON'T SPEND TO GIVE HIS ASS A RIDE

                          Comment

                          • Terry M.
                            Beyond Control Poster
                            • September 30, 1980
                            • 15573

                            #28
                            Re: 1970 fender lip notches

                            Originally posted by Kenneth Barry (7808)
                            The first pict. doesn't look right to me. Too rough & jagged to be molded that way.
                            I am not sure they were molded in Ken. I think the fender may have been trimmed to produce those notches after it comes out of the mold.
                            Terry

                            Comment

                            • Brad S.
                              Expired
                              • July 31, 2005
                              • 227

                              #29
                              Re: 1970 fender lip notches

                              Ballard recently Told me the notches were a locator for the fixture at the plant that installed the front end assembly

                              Comment

                              • Pat M.
                                Extremely Frequent Poster
                                • April 1, 2006
                                • 1575

                                #30
                                Re: 1970 fender lip notches

                                Originally posted by Kenneth Barry (7808)
                                The first pict. doesn't look right to me. Too rough & jagged to be molded that way.
                                Thought the same thing. I've never seen notches so jagged. But I haven't seen a fraction of the Vettes you guys have.

                                Originally posted by Brad Seversen (44236)
                                Ballard recently Told me the notches were a locator for the fixture at the plant that installed the front end assembly
                                I thought I had heard this as well from a respected source.

                                Comment

                                Working...

                                Debug Information

                                Searching...Please wait.
                                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                Please push the back button and reload the previous window.'
                                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                Please push the back button and reload the previous window.'
                                An internal error has occurred and the module cannot be displayed.
                                There are no results that meet this criteria.
                                Search Result for "|||"