2013 Carlisle Seminar - NCRS Discussion Boards

2013 Carlisle Seminar

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gary R.
    Extremely Frequent Poster
    • April 1, 1989
    • 1796

    2013 Carlisle Seminar

    Hi Folks, I will be holding an open discussion seminar this year on boxes, Diff's, T/A's, and u-joints. This is a free seminar for an hour on Friday afternoon. I will have some cut-aways showing the inner workings on these units. Hope to see you there. I'll have some examples of things I've found too from various jobs sent in that you may find interesting.
  • Floyd B.
    Extremely Frequent Poster
    • November 1, 2002
    • 1046

    #2
    '69 Blue/Blue L36 Vert w/ 4-Spd
    '73 Blue/Blue L48 Coupe w/ 4-Spd
    '96 Red/Black LT-4 Convertible
    "Drive it like you stole it"

    Comment

    • Gary R.
      Extremely Frequent Poster
      • April 1, 1989
      • 1796

      #3
      Re: 2013 Carlisle Seminar

      Hi Floyd
      Glad to have you there. Last year I did cover differentials both street/drag usage and posi tuning. I'll be glad to go over that again if there are any questions.
      Gary

      Comment

      • Thomas H.
        Extremely Frequent Poster
        • August 31, 2005
        • 1053

        #4
        Re: 2013 Carlisle Seminar

        I plan on being there on Friday. I'll be sure to stop by.

        Tom
        1958, 283/245, White/red - Top Flight, October 2016
        1960, Black/black, 283/230 4sp
        1966, Black/Red, 327/350 4sp w/AC
        1967, 427/390, 4sp, Goodwood Green, Coupe
        1971 LS5, 4sp, coupe, Bridgehampton Blue
        2007 Z06, Lemans Blue

        Newsletter Editor, Delaware Valley Chapter

        Comment

        • Gary R.
          Extremely Frequent Poster
          • April 1, 1989
          • 1796

          #5
          Re: 2013 Carlisle Seminar

          Hi Tom. The seminar is 2:00 pm Friday and I'll be at L116& 117 the rest of the time. Hope to see you there.

          Comment

          • Gary R.
            Extremely Frequent Poster
            • April 1, 1989
            • 1796

            #6
            Re: 2013 Carlisle Seminar

            Seminar has been changed to 1:30 still in Building R

            So who is going? It will be open discussion and I'll have some examples of things I've had to repair over the years

            Comment

            • David H.
              Extremely Frequent Poster
              • June 30, 2001
              • 1485

              #7
              Re: 2013 Carlisle Seminar

              My son and I will be there. Appreciate your efforts, we have enjoyed your prior seminars. Thanks
              Judging Chairman Mid-Way USA (Kansas) Chapter

              Comment

              • R N.
                Expired
                • May 31, 2002
                • 640

                #8
                Re: 2013 Carlisle Seminar

                Originally posted by Gary Ramadei (14833)
                Seminar has been changed to 1:30 still in Building R

                So who is going? It will be open discussion and I'll have some examples of things I've had to repair over the years
                I be there too! I'm looking forward to it.

                Comment

                • Brian M.
                  Extremely Frequent Poster
                  • February 1, 1997
                  • 1837

                  #9
                  Re: 2013 Carlisle Seminar

                  I'll be there. Thanks. Stop by G110 afterwards.

                  Comment

                  • Gary R.
                    Extremely Frequent Poster
                    • April 1, 1989
                    • 1796

                    #10
                    Re: 2013 Carlisle Seminar

                    Sounds good guys. I will be in the shop tomorrow putting a 30 spline posi demo together to bring along with a rear bearing & box cut away demo's. See you then

                    Comment

                    • Brian K.
                      Very Frequent User
                      • September 19, 2007
                      • 174

                      #11
                      Re: 2013 Carlisle Seminar

                      I hope to be there as well!
                      66 Coupe
                      66 Convertible
                      2022 2LT Coupe
                      67 Chevelle SS396
                      67 XLCH HD Sportster

                      Comment

                      • Gary R.
                        Extremely Frequent Poster
                        • April 1, 1989
                        • 1796

                        #12
                        Re: 2013 Carlisle Seminar

                        Hi All
                        I just want to thank those that attended the Friday Seminar, I hope you liked the informal open discussion. I ran out of time again during my alotted slot but I think I covered the questions asked of me. I had a good time again although this morning it was very light so we packed up and left by 8:00am.

                        Comment

                        Working...

                        Debug Information

                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"