68 clutch chatter - NCRS Discussion Boards

68 clutch chatter

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dale P.
    Expired
    • September 30, 1995
    • 248

    68 clutch chatter

    I have a very bad clutch chatter on my 68 BB. it only chatters when starting from a dead stop. if I get the RPM up high and let the clutch out rather quickly it is almost gone. never chatters once moving. The clutch doesn't slip at all. any ideas?
  • Edward J.
    Extremely Frequent Poster
    • September 15, 2008
    • 6940

    #2
    Re: 68 clutch chatter

    Dale, the flywheel or pressure plate, or both has some hot spots on it and this is what generally causes clutch chatter. If you can modify your take off as you have done is about the only thing you can do, other than just doing a clutch job.
    New England chapter member, 63 Convert. 327/340- Chapter/Regional/national Top Flight, 72 coupe- chapter and regional Top Flight.

    Comment

    • Jim T.
      Expired
      • March 1, 1993
      • 5351

      #3
      Re: 68 clutch chatter

      How does it respond taking off from a stop going downhill?

      Comment

      • Gene M.
        Extremely Frequent Poster
        • April 1, 1985
        • 4232

        #4
        Re: 68 clutch chatter

        Dale,
        I had same issue years ago. New clutch disc, surfaced the fly wheel at machine shop, and air sander with 120 grit to clean pressure plate fixed it up.

        Comment

        • Anthony S.
          Very Frequent User
          • April 30, 1998
          • 156

          #5
          Re: 68 clutch chatter

          Dale, It's probaby oil or oxidation on on the pressure plate, more driving can make this condition go away in these cases. I have had this issue when the car sits in storage for a while. Check to make sure the bolts on the motor mounts are tight enough. A bent shaft could also cause this problem (but a bad shaft is rather rare). I think weak springs
          can also cause this. good luck, Tony....

          Comment

          Working...

          Debug Information

          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"