'66 Wiper Motor Brushes - NCRS Discussion Boards

'66 Wiper Motor Brushes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom H.
    Infrequent User
    • March 31, 1975
    • 12

    '66 Wiper Motor Brushes

    Aaargh. I pulled the lead out of a brush putting my motor back together. Part #
    5044602.
    I can't find these brushes for sale anywhere, but they must have been used in other Delco applications. Thanks for any thoughts.
  • Dick W.
    Former NCRS Director Region IV
    • June 30, 1985
    • 10483

    #2
    Re: '66 Wiper Motor Brushes

    Electric motor repair shop is a good resource
    Dick Whittington

    Comment

    • Domenic T.
      Expired
      • January 29, 2010
      • 2452

      #3
      Re: '66 Wiper Motor Brushes

      I'm with Dick there as I bought all my door , head light, wiper and all other's at a local starter/ generator shop.

      You may have to make a jig to size them but they were under a buck for some.

      That was the good news, bad is that that shop went under about 2 mos ago after years of doing business here.

      DOM

      Comment

      • Don H.
        Moderator
        • June 16, 2009
        • 2236

        #4
        Re: '66 Wiper Motor Brushes

        Mr. Hanks,
        Sorry I cannot help on the motor brushes but have to say this thought.
        Welcome to the Tech Discussion Board to a member since about Day 2. Better late than never,
        and
        I loved your work in The Money Pit and Cast Away....

        OK Mr. Hanks, I still thought those were great movies, and you are already contributing.
        And you are already learning that we are real neighborly enthusiasts here. I honor you for your longevity in the club.
        Very glad to finally have you on the TDB.

        Comment

        • Joe R.
          Extremely Frequent Poster
          • July 31, 1976
          • 4547

          #5
          Re: '66 Wiper Motor Brushes

          Tom,

          Send me a PM and I'll put one in a envelope to you this week. Just need your mailing address.

          JR

          Comment

          • Tom H.
            Infrequent User
            • March 31, 1975
            • 12

            #6
            Re: '66 Wiper Motor Brushes

            Thanks VERY much. I did try to send you a PM, but got this message.

            Joe Ray (1011) has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

            Comment

            • Tom H.
              Infrequent User
              • March 31, 1975
              • 12

              #7
              Re: '66 Wiper Motor Brushes

              Thanks for the welcome. I was in the right place and time when NCRS was forming. My brother used to live a couple of houses from John Amgwert in Lincoln, Nebraska. We are from the "very good old days" when we could have a '66 and a '58 while working our way through college (but the insurance was a killer)!

              This is a great resource I was only vaguely aware of - I hope to contribute in the future.

              And, if Hollywood ever accidentally sends me one of that actor's checks, I will be in the market for more rolling stock!

              Comment

              • Dick W.
                Former NCRS Director Region IV
                • June 30, 1985
                • 10483

                #8
                Re: '66 Wiper Motor Brushes

                Originally posted by Tom Hanks (229)
                Thanks VERY much. I did try to send you a PM, but got this message.

                Joe Ray (1011) has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
                You have a PM
                Dick Whittington

                Comment

                • Joe R.
                  Extremely Frequent Poster
                  • July 31, 1976
                  • 4547

                  #9
                  Re: '66 Wiper Motor Brushes

                  Dick,

                  Didn't get the PM.

                  JR

                  Comment

                  • Joe R.
                    Extremely Frequent Poster
                    • July 31, 1976
                    • 4547

                    #10
                    Re: '66 Wiper Motor Brushes

                    Tom,

                    Try again with your address. I cleaned it up.

                    Thanks,

                    JR

                    Comment

                    • Dick W.
                      Former NCRS Director Region IV
                      • June 30, 1985
                      • 10483

                      #11
                      Re: '66 Wiper Motor Brushes

                      Originally posted by Joe Ray (1011)
                      Dick,

                      Didn't get the PM.

                      JR
                      Sent your addy to Tom
                      Dick Whittington

                      Comment

                      • Joe L.
                        Beyond Control Poster
                        • February 1, 1988
                        • 43193

                        #12
                        Re: '66 Wiper Motor Brushes

                        Originally posted by Tom Hanks (229)
                        Aaargh. I pulled the lead out of a brush putting my motor back together. Part #
                        5044602.
                        I can't find these brushes for sale anywhere, but they must have been used in other Delco applications. Thanks for any thoughts.

                        Tom------


                        I can't find any record that GM #5044602 was ever available in SERVICE although it's possible it was available through Delco dealers. The GM part number for the brush assembly for your application was GM #4904640 but it was discontinued without supercession in January, 1982.
                        In Appreciation of John Hinckley

                        Comment

                        Working...

                        Debug Information

                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"