63 metal body parts
just had my 63 coupe media blasted (what a job, very nice) what type of primer should I use on all the metal areas, ie around the doors, under the body, i have the green zinc spray from LI corvette, I what like to use spray cans. thanks
-
-
Re: 63 metal body parts
Bob, some of the parts were natural and some were black. As an example the two long underbody brackets that the two bolts from the seats screw into are black, the underbody brackets that hold the seat belt anchors were natural as I recall. Natural will immediately rust again.
You can use any color primer you want but a finish color is black.
Check all the underbody brackets for rust, corrosion etc. This is the perfect time to replace all that stuff if needed.
Comment