67 regulator ground screw/star washer? - NCRS Discussion Boards

67 regulator ground screw/star washer?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • John S.
    Expired
    • May 17, 2009
    • 164

    67 regulator ground screw/star washer?

    Should the 67 ground screw for the regulator have a star washer? Mine has screw with flat surface type area under the head. Should it also have a star washer under that?
  • Peter L.
    Extremely Frequent Poster
    • May 31, 1983
    • 1930

    #2
    Re: 67 regulator ground screw/star washer?

    John - I just double checked the ground wire at the regulator on our sb 67 & it does not have a separate star washer. The ground wire from the harness on our 67 is attached to one of the regulator mounting screws that has "lock washer like" surface on the underside of the washer feature of the mounting screw.

    I also looked at the 67 Corvette AIM & as far as I can see, the ground wire on the wiring harness is not long enough to go to the screw on the side of the regulator base as shown in UPC6, B4.

    Interesting.

    Pete

    Comment

    • John S.
      Expired
      • May 17, 2009
      • 164

      #3
      Re: 67 regulator ground screw/star washer?

      As I had suspected, another bogus deduct I got in judging! Thanks Pete, I could not find it either, but needed to check to be sure.

      Comment

      Working...

      Debug Information

      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"