Correct 63-67 power window regulators - NCRS Discussion Boards

Correct 63-67 power window regulators

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jeremy R.
    Expired
    • May 23, 2012
    • 137
    #1

    Correct 63-67 power window regulators

    I have noticed that some "original" power window regulators have different mounting plates than others. Some have a single pair of holes on the end by where the motor mounts, while others have two set of holes, so as to maybe have two different mounting configurations. Which is correct for OEM? Single pair, two pairs, both?
    Tags: None
      • Top
    • Joe R.
      Extremely Frequent Poster
      • July 31, 1976
      • 4547
      #2
      Re: Correct 63-67 power window regulators

      Jeremy,

      There is a pair of 63 PW regulators and motors on e-bay. Might find out something there.

      JR
        • Top

        Comment

        • Jeremy R.
          Expired
          • May 23, 2012
          • 137
          #3
          Re: Correct 63-67 power window regulators

          Well that is the caveat. Not sure of the one you are thinking of, but there is one on there that has one of both (though the one with 2 pairs looks a little suspect). And they're again "original"
            • Top

            Comment

            • Jeremy R.
              Expired
              • May 23, 2012
              • 137
              #4
              Re: Correct 63-67 power window regulators

              Anyone, anyone? This thing on?
                • Top

                Comment

                • Joe R.
                  Extremely Frequent Poster
                  • July 31, 1976
                  • 4547
                  #5
                  Re: Correct 63-67 power window regulators

                  Jeremy,

                  Those on E-babe were taken out of 1963 Roadster #16 or #17. Can't remember which!
                  If those are not original to a 63 there ain't none in the country!

                  JR
                    • Top

                    Comment

                    Previous template Next
                    Working...

                    Debug Information

                    Searching...Please wait.
                    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                    Please push the back button and reload the previous window.'
                    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                    Please push the back button and reload the previous window.'
                    An internal error has occurred and the module cannot be displayed.
                    There are no results that meet this criteria.
                    Search Result for "|||"