C1 1957 Hardtop header and horizontal side W/S
Trying to reassemble a semi-basket case. Two questions re the C1 header and horizontal side W/S:1) What is the configuration of the bow drill covering at the front of the horizontal side weather strip, how far to the front does it extend? Does it extend into the area where the sides interface with the header strip? Any pictures would be appreciated.2) How does the right angle "leg" on the side piece interface with the header W/S? From the info I have I assume (?) the rolled lip of the header W/S goes towards the rear against the triangular section of the header bar. That seems to be the way my header strip is trimmed to interface with the sides, but the narrow right angled leg off the side piece doesn't compute. How do the two pieces interface? Again, any pics would be appreciated.Thanks in advance for any help.
-
-
Re: C1 1957 Hardtop header and horizontal side W/S
Rod,
My 57 has the original hardtop with factory paint that hasn't been messed with. I'll take a couple of photos of the header and send to you.
Wayne -
Re: C1 1957 Hardtop header and horizontal side W/S
That would be great, Wayne. I appreciate it.Comment
-
Re: C1 1957 Hardtop header and horizontal side W/S
Haven't rec'd your photos yet. Did I miss it? Thanks.Comment
Comment