c2 two part primer sealer removal

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jerry G.
    Extremely Frequent Poster
    • April 1, 1985
    • 1022

    #1

    c2 two part primer sealer removal

    I have some overspray that is a two part epoxy sealer, it's yellow,on the undercarridge i'm trying to strip with paint remover, Nothing has touched it. I've even tryed the really nasty stuff. Any suggestions on stripper for this type of paint. Jerry
  • Norris W.
    Very Frequent User
    • December 1, 1982
    • 661

    #2
    Re: c2 two part primer sealer removal

    My experience has been that most primers don't respond well to stripper. Have you tried the old laquer thinner/scotch bright pad scrub?

    Comment

    • Jerry G.
      Extremely Frequent Poster
      • April 1, 1985
      • 1022

      #3
      Re: c2 two part primer sealer removal

      yup I've tried that. I think I'm going to haave to use abrasive blasting to get it off. It's a sealer that is two part epoxy. Is there a paint expert or supplier out there that has any suggestions.

      Comment

      • Donald O.
        Extremely Frequent Poster
        • June 1, 1990
        • 1564

        #4
        Re: c2 two part primer sealer removal

        Have you tried 80 to 100 grit on a DA? Its cheaper than sending out for plastic media blasting.
        The light at the end of the tunnel has been turned off.

        Comment

        Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"