H2O pump revisited 68 BB - NCRS Discussion Boards

H2O pump revisited 68 BB

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chester

    H2O pump revisited 68 BB

    Still hunting for correct water pump. with date/ letter... Also the by-pass hose was painted with the motor?, assuming this is the one that comes from the top of the water pump to manifold. Correct me if I wrong. Also the 68-72 vette vues fact book states that the manifolds were painted with the motor.
  • Joe L.
    Beyond Control Poster
    • February 1, 1988
    • 43193

    #2
    Re: H2O pump revisited 68 BB

    Chester----

    Obtaining a correctly dated water pump shouldn't be that difficult. Contact Bill Mock first. Bill advertises in the NCRS Driveline and is located in Bartlesville, OK. If he can't help you(which I doubt), then contact Paul Baker("The Pulley King") at Goat Hill Classics, in Long Beach, CA. If that doesn't work out either, contact Dr. Rebuild, Paragon Vintage, or Chicago Corvette.

    Water pump bypass hose and exhaust manifolds usually show evidence of engine painting and/or overspray. It is virtually impossible to maintain the exhaust manifold painting if you drive the car, though.
    In Appreciation of John Hinckley

    Comment

    • Joe L.
      Beyond Control Poster
      • February 1, 1988
      • 43193

      #3
      Re: H2O pump revisited 68 BB

      Chester----

      Obtaining a correctly dated water pump shouldn't be that difficult. Contact Bill Mock first. Bill advertises in the NCRS Driveline and is located in Bartlesville, OK. If he can't help you(which I doubt), then contact Paul Baker("The Pulley King") at Goat Hill Classics, in Long Beach, CA. If that doesn't work out either, contact Dr. Rebuild, Paragon Vintage, or Chicago Corvette.

      Water pump bypass hose and exhaust manifolds usually show evidence of engine painting and/or overspray. It is virtually impossible to maintain the exhaust manifold painting if you drive the car, though.
      In Appreciation of John Hinckley

      Comment

      • chester

        #4
        Re: H2O pump revisited 68 BB

        thanks Joe If memory serves me, the h2o pump for the 68 has a letter code for the month built, my car was built in april, 4-10 and is around the ##17,000 car. (let me check again as to the numbers, I think they are correct) Hey, you are an Hour behind.WhaT WOULD BE A CORRECT LETTER? jc

        Comment

        • chester

          #5
          Re: H2O pump revisited 68 BB

          thanks Joe If memory serves me, the h2o pump for the 68 has a letter code for the month built, my car was built in april, 4-10 and is around the ##17,000 car. (let me check again as to the numbers, I think they are correct) Hey, you are an Hour behind.WhaT WOULD BE A CORRECT LETTER? jc

          Comment

          • Joe L.
            Beyond Control Poster
            • February 1, 1988
            • 43193

            #6
            Re: H2O pump revisited 68 BB

            Chester----

            I'd be looking for a "C" month date code. A "B" would be alright, too.
            In Appreciation of John Hinckley

            Comment

            • Joe L.
              Beyond Control Poster
              • February 1, 1988
              • 43193

              #7
              Re: H2O pump revisited 68 BB

              Chester----

              I'd be looking for a "C" month date code. A "B" would be alright, too.
              In Appreciation of John Hinckley

              Comment

              • chester

                #8
                Re: H2O pump revisited 68 BB

                Joe i tried to e-mail you from the address above, didn't work?? jc

                Comment

                • chester

                  #9
                  Re: H2O pump revisited 68 BB

                  Joe i tried to e-mail you from the address above, didn't work?? jc

                  Comment

                  • chester

                    #10
                    Re: H2O pump revisited 68 BB

                    I called arround and found that $100-150 was the going rate, I'll check the new driveline, for the above mentioned names. thanks. jc

                    Comment

                    • chester

                      #11
                      Re: H2O pump revisited 68 BB

                      I called arround and found that $100-150 was the going rate, I'll check the new driveline, for the above mentioned names. thanks. jc

                      Comment

                      • chester

                        #12
                        Re: H2O pump revisited 68 BB

                        I called Bill Mock's and got a H2O pump at a good price. the dates he had were two before my engine build date and one 15 days after the engine build date on the block. She very intelligently informed me that the prior dates were no good and that the one after the engine date would do. Who cares at this point, it will be here in two days. Are these dates compatible with the guidlines or did I goof?

                        Comment

                        • chester

                          #13
                          Re: H2O pump revisited 68 BB

                          I called Bill Mock's and got a H2O pump at a good price. the dates he had were two before my engine build date and one 15 days after the engine build date on the block. She very intelligently informed me that the prior dates were no good and that the one after the engine date would do. Who cares at this point, it will be here in two days. Are these dates compatible with the guidlines or did I goof?

                          Comment

                          • Patrick H.
                            Beyond Control Poster
                            • December 1, 1989
                            • 11608

                            #14
                            Re: H2O pump revisited 68 BB

                            Chester,

                            I'm not sure how a water pump built after your motor was assembled could have ever made it on before the day of assembly...possible a time warp thing?

                            How much earlier were the other two dates? After all, 6 months of variation in dates BEFORE the motor assembly is normal. 15 days after is only compatible with a service assembly (read:replaced) unit that happened to be really close but not close enough.

                            Patrick
                            Vice-Chairman (West), Michigan Chapter NCRS
                            71 "deer modified" coupe
                            72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
                            2008 coupe
                            Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

                            Comment

                            • Patrick H.
                              Beyond Control Poster
                              • December 1, 1989
                              • 11608

                              #15
                              Re: H2O pump revisited 68 BB

                              Chester,

                              I'm not sure how a water pump built after your motor was assembled could have ever made it on before the day of assembly...possible a time warp thing?

                              How much earlier were the other two dates? After all, 6 months of variation in dates BEFORE the motor assembly is normal. 15 days after is only compatible with a service assembly (read:replaced) unit that happened to be really close but not close enough.

                              Patrick
                              Vice-Chairman (West), Michigan Chapter NCRS
                              71 "deer modified" coupe
                              72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
                              2008 coupe
                              Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

                              Comment

                              Working...
                              Searching...Please wait.
                              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                              Please push the back button and reload the previous window.'
                              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                              Please push the back button and reload the previous window.'
                              An internal error has occurred and the module cannot be displayed.
                              There are no results that meet this criteria.
                              Search Result for "|||"