66-67 Grille - NCRS Discussion Boards

66-67 Grille

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dave K.
    Very Frequent User
    • November 1, 1999
    • 951
    #1

    66-67 Grille

    Which way do the rivets fastening the brackets to the grille go? Are they with the head on the inside ( as I suspect)and the crimped side visible or with the rivet head outside and the crimped side non visible?

    DAve Kitch
    33108
    Tags: None
      • Top
    • John H.
      Beyond Control Poster
      • December 1, 1997
      • 16513
      #2
      Re: 66-67 Grille

      Dave -

      I don't have my car to look at right now, but the A.I.M. shows the head of both rivets at the top, with the crimped end at the bottom.
        • Top

        Comment

        • Peter L.
          Extremely Frequent Poster
          • May 31, 1983
          • 1930
          #3
          Re: 66-67 Grille

          Dave - The grill bracket rivets on the grills (which I believe to be the original grills and brackets) of both my '66 and '67 were assembled per the AIM information John provided. Large head (top) and crimped end (bottom). Pete
            • Top

            Comment

            • Dave K.
              Very Frequent User
              • November 1, 1999
              • 951
              #4
              Re: 66-67 Grille

              Pete,

              My 66 assembly manual differs from the AIM. However, does you cars show the round part of rivet on top for both the upper and lower rivets?

              Dave Kitch
                • Top

                Comment

                • Mike M.
                  Director Region V
                  • August 31, 1994
                  • 1463
                  #5
                  Heads-up *NM*

                    • Top

                    Comment

                    • John H.
                      Beyond Control Poster
                      • December 1, 1997
                      • 16513
                      #6
                      Re: 66-67 Grille

                      Dave -

                      A.I.M = Assembly Manual (same document); shows the round head of both upper and lower rivets at the top, peened-over ends at the bottom.
                        • Top

                        Comment

                        • Peter L.
                          Extremely Frequent Poster
                          • May 31, 1983
                          • 1930
                          #7
                          Re: 66-67 Grille

                          Dave - Yes, both rivets are installed in the same manner.

                          And John and Mike thanks for clarifying.

                          Pete
                            • Top

                            Comment

                            Previous template Next
                            Working...

                            Debug Information

                            Searching...Please wait.
                            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                            Please push the back button and reload the previous window.'
                            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                            Please push the back button and reload the previous window.'
                            An internal error has occurred and the module cannot be displayed.
                            There are no results that meet this criteria.
                            Search Result for "|||"