64 L76 crank and balancer - NCRS Discussion Boards

64 L76 crank and balancer

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jack Beebe

    64 L76 crank and balancer

    My balancer needs replacing (85k mi.) and I'm told it's a press fit on the crank but the keyway is worn so I need a new crank and balancer?
  • Clem Z.
    Expired
    • January 1, 2006
    • 9427

    #2
    Re: 64 L76 crank and balancer

    a good shop can weld up the crank keyway and then recut it. they can also cut it for a wider key and mill the new key down on both sides to the orignal width where it fits into the damper groove

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"