C3 Control Arm Bushings (1972) - NCRS Discussion Boards

C3 Control Arm Bushings (1972)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Bill B.
    Expired
    • September 30, 2002
    • 351

    C3 Control Arm Bushings (1972)

    I tried the archives and did not find exactly what I was looking for on bushing installation. I will be installing all bushing in next couple of days and want to make sure things are right the first time! My specific question is: what exactly determines how far the bushings are pressed in? Do you stop when the inner sleeve contacts the shaft ridge or is there something else which guages it?
  • Chuck R.
    Expired
    • April 30, 1999
    • 1434

    #2
    Re: C3 Control Arm Bushings (1972)

    Hi Bill,

    I pressed mine in until the bushing flange bottomed out against the control arm.

    I ensured that I had a piece of bar stock filling the air gap between the two bores so as not to squash them together.

    Chuck

    Comment

    Working...

    Debug Information

    Searching...Please wait.
    An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

    Please push the back button and reload the previous window.'
    An unexpected error was returned: 'Your submission could not be processed because the token has expired.

    Please push the back button and reload the previous window.'
    An internal error has occurred and the module cannot be displayed.
    There are no results that meet this criteria.
    Search Result for "|||"