C2 64 Emblems

[Jeff M #42706]

Re: C2 64 Emblems

Thanks everyone! I measured as close as I could with the manual and basically got the exact same thing. Bad news is the ones on it are 1/2" too high more glass work........
JM

[Jeff M #42706]

Re: C2 64 Emblems

Thanks everyone! I measured as close as I could with the manual and basically got the exact same thing. Bad news is the ones on it are 1/2" too high more glass work........
JM

[Brent #37070]

Re: C2 64 Emblems

Thanks John. Do you think the door gap blade fixture on the right could have been adjusted different than the one the left? Or did they use something soft for the blade that wouldn't damage the fender of door edges and it became worn? Just stupid curiosity.

[Brent #37070]

Re: C2 64 Emblems

Thanks John. Do you think the door gap blade fixture on the right could have been adjusted different than the one the left? Or did they use something soft for the blade that wouldn't damage the fender of door edges and it became worn? Just stupid curiosity.

[John H.]

Re: C2 64 Emblems

Most hand-apply drill fixtures were made from aluminum, with nylon locating features; all holes in painted surfaces were drilled in the Body Shop, prior to painting.

[John H.]

Re: C2 64 Emblems

Most hand-apply drill fixtures were made from aluminum, with nylon locating features; all holes in painted surfaces were drilled in the Body Shop, prior to painting.