Part # help=Joe ???

[Tom S.]

Joe
I am looking for the plastic pad that fastens to the floor and goes over the dimmer switch on a 69. It resembles a small accelerator pedal. I have tried all the after market parts houses and most of them don't even know what I am talking about.Do you know what the part number would be so that I can check dealers or try on E-bay?I have new carpet for it but would like to replace this part first.Thanks for your help in advance.

Tom

[Kurt B.]

Re: Part # help=Joe ???

Tom,
I am looking for the same part for my 68 coupe so if you find a source, could you please let me know. I had no luck on e-bay and none of the aftermarket vendors seem to have it in their catalogs.
Thanks,
Kurt 26406

[Jim T.]

Re: Part # help=Joe ???

For some used parts you might try www.contemporarycorvettes.com and call Paragon. Both facilities have donor parts cars.

[Tom S.]

Re: Part # help=Joe ???

Jim
I have tried Paragon with no luck.I will try contemp.and see what happens.This must be a fairly common part to be replaced. It cracks just above the floor where it pivots.I don't know how many years they used this same part, but I would think some one would reproduce them. If I could get a GM part # that would be a help. The local dealers don't want to be bothered trying to look something like this up.Thanks for any and all help.

Tom

[George W.]

Re: Part # help=Joe ???

I have one of these. It is out of a '70 cp. e me for further info. G.

[Dick W.]

Re: Part # help=Joe ???

GM part # would be no help. Check the recent archives for a posting from Joe Lucia concerning this part. Loooong been discontinued.