66 Power Window Harness Routing - NCRS Discussion Boards

66 Power Window Harness Routing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mike S.
    Expired
    • September 30, 1999
    • 91

    66 Power Window Harness Routing

    What is the correct routing for the harness? The assembly manual appears to indicate it leaves the switch on the right, travels diagonally down and forward across the tunnel, and then follows the floor/tunnel junction up to the firewall. However, it looks like a better and simpler route would be under the edge of shifter console. Which is correct?

    Thanks,

    Mike S
    #33053
Working...

Debug Information

Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.

Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
There are no results that meet this criteria.
Search Result for "|||"