C2 Transmission - NCRS Discussion Boards

C2 Transmission

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Michael S.
    Frequent User
    • May 31, 2002
    • 91

    C2 Transmission

    I have a 327/350 '67 convertible. Noticed about one week ago a very whiny, whirring first gear. Today I opened it up a bit and when I shifted from second to third the whine/whir started for good, real loud. Motor ran fine, I even had all the gears. The noise was real loud though, in all gears, in neutral and at idle. I limped home about 3 miles, garaged it and now it won't start. All I get is a whir from the starter. I am thinking ring gear or flywheel gave up. Any suggestions ?

    Thanks
  • Mike M.
    NCRS Past President
    • May 31, 1974
    • 8365

    #2
    Re: C2 Transmission

    pull starter and have a peek at the flywheel/ring gear. mike

    Comment

    • Terry F.
      Expired
      • September 30, 1992
      • 2061

      #3
      Re: C2 Transmission

      It sounds the the starter gear stayed engage or something? I would pull the starter also. Terry

      Comment

      • Michael S.
        Frequent User
        • May 31, 2002
        • 91

        #4
        Re: C2 Transmission

        Thanks, will do.

        Comment

        Working...

        Debug Information

        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"