C2 Fuel injection cold enrichment adjustment

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Floyd #21606

    #1

    C2 Fuel injection cold enrichment adjustment

    I have a 65 vette with fuel injection, I want to adjust the cold enrichment (choke). The 65 shop manual says to set to index. What is index? It doesn't say anything about x number of notches to rich or lean.
    Any information is appreciated.

    Regards,
    Floyd
    65 Fuelie
  • Mike McKown

    #2
    Adjust as required to keep it running after you

    get it started. I don't think the choke will make it start any faster. Make sure your butterfly shaft is not binding and your fast idle linkage is free.

    Comment

    • William C.
      NCRS Past President
      • June 1, 1975
      • 6037

      #3
      Re: Adjust as required to keep it running after yo

      Index is the position in the center of the rich-lean marks on the edge of the thermostat housing.
      Bill Clupper #618

      Comment

      • G B.
        Expired
        • December 1, 1974
        • 1373

        #4
        Good luck. I think.

        If any 7380 unit runs properly when cold with an assembly line choke cover set near the GM index mark, then that unit is running far too lean when the engine has warmed up.

        Comment

        • George J.
          Very Frequent User
          • March 1, 1999
          • 757

          #5
          Again, Jerry is right....

          The index mark on the choke cover is useless. Adjust it so that the choke releases when you want it to by trial and error.

          George 31887

          Comment

          • Floyd #21606

            #6
            Jerry,George,Mike & Bill - Thanks for the info

            Thanks Guys, For the information, it is greatly appreciated. I think I can get a handle on it now.
            Regards,
            Floyd
            65 Fuelie

            Comment

            Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"