Tweet
People buying Posi third members know to look for a "P" on the case , but the Banjo with out looking inside how do you tell a Posi, non-Posi banjo?
-
-
Re: Posi or non-Posi Banjo????????????
Well I see every one must know how !!! -
Sorry you didn't get the standing ovation...
...you were looking for... :-(Comment
-
Re: Sorry you didn't get the standing ovation...
Dennis ! How do you tell a Posi banjo housing from non-Posi housing by looking under the Corvette, disregarding the third member? ThanksComment
-
On my '62, I always check to see that it still...
...has the vent line and the little lube warning washer held in place by the fill plug.Comment
-
Re: On my '62, I always check to see that it still
The vent hole can be changed, what I was asking if some one knew that the banjo cast ends that are welded at each end are different in design for Posi and non Posi , that is why you have different bearings, axles and axle retainers.
Every one is adding a Posi third member claming their Corvette was originally a Posi Vett and judges should look at the banjo ends, like looking at fuel lines for FI vetts. Your the only person responding and I thank you.
I thought others would be interested BUT!
Comment
Comment