reccomed someone to rebuild tripower carbs - NCRS Discussion Boards

reccomed someone to rebuild tripower carbs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Brad M.
    Expired
    • January 1, 2005
    • 16

    reccomed someone to rebuild tripower carbs

    looking to get someone to rebuild and tune my original carbs, they still run ok ,but i am freshening up engine and want to the same for carbs, does anybody reccomend a co or person who is reliable!!
  • Jacob A.
    Very Frequent User
    • December 1, 2003
    • 238

    #2
    Re: reccomed someone to rebuild tripower carbs

    Hi Brad,

    IF you look on ebay under corvette tri-power, you will find tri-carb restoration services. I have spoken with a lot of guys about purchasing a tri-power set-up, and from what I can tell... Al Fierke at Chicago Corvette Supply REALLY knows what he is talking about. Give him a call at (708) 458-2500 tell him Jacob sent you. I just bought some heads for my 57 from him.

    Regards,
    Jacob Angel

    Comment

    • Patrick H.
      Beyond Control Poster
      • December 1, 1989
      • 11608

      #3
      Re: reccomed someone to rebuild tripower carbs

      I wouldn't give Al another dime of my money if he had the last Corvette part I ever needed to finish a restoration.
      He may know a lot, but he sends out all his restoration work. Some of them that you get back might even work.

      I highly recommend checking out some of the references in the Archives for people who actually perform the restorations such as Jerry Luck.

      Patrick
      Vice-Chairman (West), Michigan Chapter NCRS
      71 "deer modified" coupe
      72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
      2008 coupe
      Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

      Comment

      • Harmon C.
        Extremely Frequent Poster
        • August 31, 1994
        • 3228

        #4
        Re: reccomed someone to rebuild tripower carbs

        I'm with Patrick. Three times same carb, parts missing,vacumn line put in threaded hole for solinoid bracket, dumped gas all over intake. UPS made lots of money and I now fix my own carbs.

        Lyle
        Lyle

        Comment

        • Peter K.
          Expired
          • January 1, 1999
          • 117

          #5
          Re: reccomed someone to rebuild tripower carbs

          Jerry Luck restored my carbs and intake for my 67 tri-power, it took a while but he did a great job.

          Comment

          • Ken Edmunds

            #6
            Re: reccomed someone to rebuild tripower carbs

            EIther Jerry Luck or Bob Kunz in St Louis. Bob has been doing mine for years, Jerry did one for me this year-both outstanding.

            Comment

            • don22567

              #7
              Re: reccomed someone to rebuild tripower carbs

              I have used Jerry Luck and he is good but also expensive and takes a long time to get your carbs back. I now use a guy in PA who does great work, is much less expensive and gets them done in a couple of weeks. His name is Mike at Avanti Performance. His number is - (215) 249-9957

              Comment

              • Chris S.
                Extremely Frequent Poster
                • January 1, 2000
                • 1064

                #8
                Re: reccomed someone to rebuild tripower carbs

                I used Daytona Auto in Florida and all three of mine looked awesome. I have also used Holley for my Mopar tri carbs and they looked awesome. I used Bob Kuntz and was NOT impressed. Daytona did a far better job.
                1954 Corvette #3803 - Top Flight 2012, Bloomington Gold 2012,
                Triple Diamond Award 2012, Gold Concourse Award 2012, Regional and National Top Flight 2014
                1954 Corvette #3666 - "The Blue Devil" - Pennant Blue - restoration started
                1957 Corvette - FI 3 sp - Black and Silver

                Comment

                • Jacob A.
                  Very Frequent User
                  • December 1, 2003
                  • 238

                  #9
                  Re: reccomed someone to rebuild tripower carbs

                  Wow, I am blown away.... and now a little scared about the 3000.00 I just gave Al for my 997 heads.

                  Oh well... I can trust MY engine builder, and he will know if the heads are o.k. I will definately make a post on this board and let everyone know!

                  Comment

                  • Walt W.
                    Expired
                    • November 1, 1998
                    • 92

                    #10
                    Re: reccomed someone to rebuild tripower carbs

                    Brad,

                    I've used Dan Squires for two sets of tri carbs and been very happy with the workmanship and his willingness to help troubleshoot problems over the phone. His # is 630-551-0595

                    Walt Weems

                    Comment

                    • Patrick H.
                      Beyond Control Poster
                      • December 1, 1989
                      • 11608

                      #11
                      Re: reccomed someone to rebuild tripower carbs

                      If they're anything like many of the parts I've seen come from him, they'll only cost you $10,000 total by the time they're working well.



                      Sort of like my $1000 Quadrajet....

                      Patrick
                      Vice-Chairman (West), Michigan Chapter NCRS
                      71 "deer modified" coupe
                      72 5-Star Bowtie / Duntov coupe. https://www.flickr.com/photos/124695...57649252735124
                      2008 coupe
                      Available stickers: Engine suffix code, exhaust tips & mufflers, shocks, AIR diverter valve broadcast code.

                      Comment

                      • John Pelkofer Jr

                        #12
                        Re: reccomed someone to rebuild tripower carbs

                        I just had the carburetors on my 1967 427/435 restored by Jerry MacNeish at
                        Camaro Hi-Performance. He did a fantastic job, they look and perform as new,
                        turn around was quick, and price was very reasonable. His number is
                        410-781-0418. Web sight www.z28camaro.com

                        Comment

                        Working...

                        Debug Information

                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"